![background image](http://html1.mh-extra.com/html/carrier/53ssa009-1-series/53ssa009-1-series_service-manual_2561771009.webp)
9
Rear panel removal
Remove the condensate tank in the rear of the unit.
On mod. 53SSA009---1, unscrew the fixing screw with a screwdriver and remove the closing cover.
Unscrew the four side clamping screws, lift the back panel about 10 mm and finally remove it.
At this point it is possible to make any check and/or service operation on the unit.
Control panel template removal
Remove the control panel template levering
on the two hooks placed in its lower part.
In this way all the electrical and electronic parts of
control panel can be reached and it is also possible
do all checks and parts substitutions of the same panel.
Electromechanical control removal
Remove the plug-in switch knob, release the plastic tab
and remove the switch end the board.
UNIT DISASSEMBLY
7