( 7 )
REMOTE CONTROL INSTALLATION (Cont.)
5-2 INSTRUCTIONS OF USING WIRELESS REMOTE CONTROL
1- The remote control must be directed toward the receiver of indoor unit when pressing the buttons
of the desired functions. An acoustical acknowledgement sound (beep) will indicate that signal has
been received.
2- Avoid direct sunlight on the receiver of indoor unit, which may interfere with good signal reception
and the air conditioner may not work properly. Draw the curtains to avoid direct sunlight.
3- Avoid obstacles obstructions such as curtains, doors or other materials between the remote control
and the receiver of indoor unit to avoid blocking the signals from the remote control to the indoor unit.
4- The maximum operating distance for the remote control is approximately 8 meters.
5- Keep the remote control away from water. Do not let the remote control fall down.
6- Never use objects with sharp point to press the button on the remote control.
7- Prevent any liquid from falling into the remote control.
8- If other electric applications react to the remote control, move these applications.
8. DESCRIPTION OF EMERGENCY BUTTON
EMERGENCY FUNCTION
Emergency function can be used temporarily in case you cannot find the remote control or its batteries are
exhausted.
To perform Emergency function, follow below steps :
1.
Open and lift the front panel up to an angle until
it remains fixed with a clicking sound.
2.
Press manual control button ( AUTO / COOL )
until AUTO led
AUTO
illuminates on the display
panel of the indoor unit.
then the unit will work in forced AUTO mode
(the default setting temperature is 24°C).
3.
Close the panel firmly to its original position.
CAUTION
•
Once you press the manual control button
( AUTO / COOL ), the operation mode is shifted
in an order as :
AUTO
→
Forced COOL
→
OFF
•
Push the manual control button to operate in forced COOL
mode, this is used for testing purposes only.
You had better not choose it.
•
The Forced COOL mode is used only for testing
purposes by the installer and serviceman.
•
To restore the remote control operation, use the remote
controller directly.
Remote
control
8 meter
Front panel
