![background image](http://html1.mh-extra.com/html/carrier/50he003/50he003_installation-instructions-manual_2561581044.webp)
44
Table 13—Accessory/FIOP Electric Heaters Static Pressure Drop (in. wg) — 50HJ004-007 and 50HE003--006
COMPONENT
CFM
600
900
1200
1400
1600
1800
2000
2200
2400
2600
1 Heater Module
0.03
0.05
0.07
0.09
0.09
0.10
0.11
0.11
0.12
0.13
2 Heater Modules
0.14
0.15
0.16
0.16
0.16
0.17
0.17
0.17
0.18
0.18
Table 14—Accessory/FIOP EconoMi$er IV and EconoMi$er2 Static Pressure* (in. wg) — 50HJ004-007 and 50HE003--006
COMPONENT
CFM
600
800
1000
1250
1500
1750
2000
2250
2500
2750
3000
Vertical EconoMi$er IV and EconoMi$er2
0.01
0.02
0.035
0.045
0.065
0.08
0.12
0.145
0.175
0.22
0.255
Horizontal EconoMi$er IV and EconoMi$er2
---
---
---
—
—
0.1
0.125
0.15
0.18
0.225
0.275
LEGEND
FIOP
--- Factory---Installed Option
*The static pressure must be added to external static pressure. The sum and the indoor entering-air cfm should be used in conjunction with the Fan Performance
tables to determine indoor blower rpm and watts.
Table 14 — Evaporator-Fan Motor Efficiency
MOTOR 50HJ
EFFICIENCY
003,004,005
75
006
74/84*
007
84
*Single-phase/3-phase.
NOTE: Convert watts to bhp using the following formula:
bhp =
watts input x motor efficiency
746
GENERAL FAN PERFORMANCE NOTES
1. Values include losses for filters, unit casing, and wet coils. See Table 13 and 14 and Fig. 46 for accessory/FIOP static pressure
information.
2. Extensive motor and electrical testing on these units ensures that the full range of the motor can be utilized with confidence. Using the
fan motors up to the ratings shown will not result in nuisance tripping or premature motor failure. Unit warranty will not be affected.
See Table 11 and 12 on this page for additional information.
3. Use of a field-supplied motor may affect wire sizing. Contact your Carrier representative to verify.
4. Interpolation is permissible. Do not extrapolate.
5. Performance includes clean filter and wet coil.
Table 15—Fan Performance 50HE003 — Vertical Discharge Units; Standard Motor (Belt Drive)**
AIRFLOW
(Cfm)
EXTERNAL STATIC PRESSURE (in. wg)
0.1
0.2
0.4
0.6
0.8
1.0
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
600
500
0.08
531
0.08
607
0.14
713
0.21
788
0.29
878
0.37
700
529
0.09
567
0.09
633
0.16
739
0.24
816
0.32
902
0.41
800
547
0.1
592
0.12
660
0.19
761
0.27
845
0.37
937
0.47
900
570
0.13
620
0.14
691
0.22
793
0.32
870
0.42
957
0.53
1000
599
0.15
650
0.16
717
0.26
818
0.36
894
0.47
981
0.58
50H
E,
H
J