![background image](http://html.mh-extra.com/html/carrier/48lc-series/48lc-series_installation-instructions-manual_2561051003.webp)
3
GENERAL
See Fig. 1 for model number nomenclature. See Fig. 2 and 3 for
unit dimensional drawings. Figure 4 shows service clearance di
-
mensions.
Rated Indoor Airflow (cfm)
Table 1 lists the rated indoor airflow used for the AHRI efficiency
rating for the units covered in this document.
WARNING
FIRE HAZARD
Failure to follow this warning could result in severe personal
injury and/or property damage.
Manifold pressure tap set screw must be tightened and
1
/
8
-in.
NPT pipe plug must be installed to prevent gas leaks.
MANIFOLD
GAS VALVE
MANIFOLD PRESSURE
TAP SET SCREW
Table 1 —
Rated Indoor Airflow (cfm)
MODEL NUMBER
FULL LOAD AIRFLOW (CFM)
48LC**08
2625
48LC**09
2970
48LC**12
3500
Summary of Contents for 48LC Series
