![background image](http://html1.mh-extra.com/html/carrier/40vu007-0182-7g-qee/40vu007-0182-7g-qee_installation-and-owners-manual_2562022025.webp)
Electrical Wiring
• The dipswitch is dialed to “ON” position with the overline at the state of strapping if the code or overline
status is “1” The dipswitch is dialed to “OFF” position with the overline at the state of disconnection if the
code or overline status is “O”.
• In the table below, the choice in the box “□” refers to the setting of the socket/overline before delivery.
Indoor Units PCB
In the following table, 1 represents ON and O represents OFF. Definition principles of code switches:
SW01 is used to set capabilities of master and slave indoor units as well as indoor unit; SW03 is
used to set indoor unit address (combine original communication address and address of centralized
controller).
(A) Definition and description of SW01
Dipswitch Setting
19
Note 1: A wired controller can connect to at most eight ultrathin air-duct indoor units.
Summary of Contents for 40VU007-0182-7G-QEE
Page 30: ...The manufacturer reserves the right to change any product specifications without notice...
Page 85: ...Le fabricant se r serve le droit de modifier les sp cifications du produit sans pr avis...
Page 113: ...Der Hersteller beh lt sich das Recht vor Produktspezifikationen ohne Vorank ndigung zu ndern...
Page 169: ...O fabricante reserva se o direito de alterar as especifica es do produto sem aviso pr vio...