2
GENERAL
The 40VMM medium static duct indoor fan coil unit offers
simple operation and long service with proper installation,
operation, and regular maintenance.
The equipment is initially protected under the manufacturer’s
standard warranty; however, the warranty is provided under the
condition that the steps outlined in this manual for initial
inspection, proper installation, regular periodic maintenance,
and everyday operation of the unit be followed in detail. This
manual should be fully reviewed in advance before initial
installation, start-up, and any maintenance. Contact your local
sales representative or the factory with any questions before
proceeding.
See Fig. 1 for model number nomenclature. Table 1 shows
components that may or may not be used for a particular
installation. Table 2 lists physical data for each unit size. Figs. 2
and 3 show unit dimensions. Figs. 4-12 show fan performance
curves.
CAUTION
DO NOT re-use compressor oil or any oil that has been
exposed to the atmosphere. Dispose of oil per local codes
and regulations. DO NOT leave refrigerant system open to
air any longer than the actual time required to service the
equipment. Seal circuits being serviced and charge with
dry nitrogen to prevent oil contamination when timely
repairs cannot be completed. Failure to follow these
procedures may result in damage to equipment. For
information about replacement oil type and viscosity, see
the Installation, Start-Up, and Service Instructions for the
38VMAH and 38VMAR outdoor units.
40
VM
M 007
--
3
0
40
4
— Indoor Unit
Product Type
VM
— VRF
Voltage (V-Ph-Hz)
3
— 208/230-1-60
Blank
Model Type
M
— Medium Static Duct
Capacity (Btuh)
Equipment Type
A40-1913
007
— 7,000
012
— 12,000
018
— 18,000
030
— 30,000
009
— 9,000
048
— 48,000
015
— 15,000
024
— 24,000
036
— 36,000
A
Design Revision
Fig. 1 — Model Number Nomenclature
LEGEND
VRF
— Variable Refrigerant Flow
