40MPHB: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
13
Preparing for Extended Shutdown Period
Clean the filters and reposition them in the unit. Operate the unit in
FAN
ONLY
mode for 12 hours to dry all internal parts. Turn the main power
supply off and remove the batteries from the remote control.
A220226
Fig. 22 —Extended Shutdown Period Steps
System Operation Recommendations
The items outlined in the following list help to assure proper system
operation:
•
Replace both remote control batteries at the same time.
• Point the remote control toward the unit display panel when
transmitting a command.
• Keep doors and windows closed while unit is operating.
• Contact an authorized service representative if a problem arises that
cannot be easily resolved.
• Do not perform cleaning or maintenance activities while the unit is on.
• Keep the display panel on the unit away from direct sunlight and heat
as this may interfere with remote control transmissions.
• Do not block air intakes and outlets on the indoor or outdoor units.
Energy Saving Recommendations
The following recommendations will add greater efficiency to the
ductless system:
• Select a comfortable thermostat setting and leave it at chosen setting.
Avoid continually raising and lowering the setting.
• Keep the filter clean. Frequent cleaning may be necessary depending
on indoor air quality.
• Use drapes, curtains or shades to keep direct sunlight from heating the
room on very hot days.
• Limit the unit’s run time by using the
TIMER
function.
• Do not obstruct the air intake on the front panel.
• Turn on the air conditioning unit before the indoor air becomes too
uncomfortable.
Clean all filters
Turn on FAN function until
unit dries out completely
Turn off the unit and
disconnect the power
Remove batteries
from remote control