Carrier 38FZ/BZ 024, Installation, Operation And Maintenance Instructions, Page: 30 / 40

30
Air discharge
In these units the air discharge and supply (indoor and outdoor)
is factory-set as shown in Fig. 31. Alternative positions are
possible, as follows (Fig. 32):
Fig. 31 - Standard air supply and discharge
Fig. 32 - Alternative air supply and discharge (except
outdoor unit model 084)
A = Alternative
NOTE: In the 50TZ/YZ 060 and 40BZ 060 units the standard
indoor air discharge is through this panel.
Outdoor unit change
a) Detach discharge panel and access panel .
b) Remove the fan/motor assembly , loosening it from the
unit base and remove the duct .
c) Unscrew the angle irons in the fan/motor assembly .
d) Turn the fan/motor assembly by 180° and attach the
angle irons previously removed.
e) Fasten the fan/motor assembly in its new position.
f) Install the discharge panel and the access panel in
their new positions.
g) Remove supply air panel and access panel
! .
h) Exchange the position of panels and
!
.
See Figs. 31 and 32.
S = Standard
NOTE: In the 50TZ/YZ 060 and 40BZ 060 units the standard
indoor air discharge is through this panel.
Legend Figs. 31 and 32
1
Indoor air discharge panel
2
Access panel
3
Indoor fan/motor assembly
4
Air filter panel
5
Access panel
6
Outdoor air discharge panel
7
Access panel
8
Air discharge duct
9
Outdoor fan/motor assembly
0
Outdoor air supply panel
!
Access panel
Indoor unit change
a) Detach discharge panel and access panel .
b) Remove the fan/motor assembly , loosening it from the
unit base. In sizes 50TZ/YZ 060 and 40BZ 060 remove
the duct.
c) Unscrew the angle irons in the fan/motor assembly .
d) Turn the fan/motor assembly by 180° and attach the
angle irons previously removed.
e) Fasten the fan/motor assembly in its new position.
f) Install the discharge panel and the access panel in
their new positions.
g) Remove filter panel and access panel
.
h) Exchange the position of panels and .
See Figs. 31 and 32.