338106--754--CBP
338106--755--CBP
338106--756--CBP
338106--757--CBP
Installation Instructions
Blower Housing Service Kit
For 35---in. Tall High Efficiency
Condensing Gas Furnace
NOTE
: Read the entire instruction manual before starting the
installation.
SAFETY CONSIDERATIONS
Improper installation, adjustment, alteration, service, maintenance,
or use can cause explosion, fire, electrical shock, or other
conditions which may cause death, personal injury, or property
damage. Consult a qualified installer, service agency, or your
distributor or branch for information or assistance. The qualified
installer or agency must use factory--authorized kits or accessories
when modifying this product. Refer to the individual instructions
packaged with the kits or accessories when installing.
Follow all safety codes. Wear safety glasses, protective clothing,
and work gloves. Have a fire extinguisher available. Read these
instructions
thoroughly and follow all warnings or cautions
include in literature and attached to the unit. Consult local building
codes, the current editions of the National Fuel Gas Code (NFGC)
NFPA 54/ANSI Z223.1 and the National Electrical Code (NEC)
NFPA 70.
In Canada, refer to the current editions of the National Standards of
Canada CAN/CSA--B149.1 and .2 Natural Gas and Propane
Installation Codes, and Canadian Electrical Code CSA C22.1.
Recognize safety information. This is the safety--alert symbol
.
When you see this symbol on the unit and in instructions or
manuals, be alert to the potential for personal injury.
Understand the signal words
DANGER
,
WARNING
, and
CAUTION
. These words are used with the safety--alert symbol.
DANGER
identifies the most serious hazards which
will
result in
severe personal injury or death.
WARNING
signifies hazards
which
could
result in personal injury or death.
CAUTION
is used
to identify unsafe practices which
may
result in minor personal
injury or product and property damage.
NOTE
is used to highlight
suggestions which
will
result in enhanced installation, reliability, or
operation.
Follow all safety codes. Wear safety glasses and work gloves. Have
a fire extinguisher available.
!
WARNING
FIRE, EXPLOSION, ELECTRICAL SHOCK
HAZARD
Failure to follow this warning could result in personal injury,
death and/or property damage.
The ability to properly perform maintenance on this equipment
requires certain knowledge, mechanical skills, tools, and
equipment. If you do not possess these, do not attempt to
perform any maintenance on this equipment other than those
procedures recommended in the Home Owner’s Information
Manual.
!
WARNING
FIRE, EXPLOSION, ELECTRICAL
SHOCK AND
CARBON MONOXIDE POISONING HAZARD
Failure to follow this warning could result in personal injury,
death and/or property damage.
Improper
installation,
adjustment,
alteration,
service,
maintenance, or use can cause carbon monoxide poisoning,
explosion, fire, electrical shock, other conditions, which could
result in personal injury or death. Consult your distributor or
branch for information or assistance. The qualified installer or
agency must use only factory--authorized kits or accessories
when servicing this product.
!
WARNING
ELECTRICAL SHOCK, FIRE OR EXPLOSION HAZARD
Failure to follow this warning could result in personal injury or
death, or property damage.
Before installing, modifying, or servicing system, main electrical
disconnect switch must be in the OFF position and install a
lockout tag. There may be more than one disconnect switch.
Lock out and tag switch with a suitable warning label. Verify
proper operation after servicing.
INTRODUCTION
This instruction covers the blower housing installation on 35 in.
tall condensing gas furnaces. The blower housing should be
replaced when there is visible damage to the blower housing.
DESCRIPTION AND USAGE
The blower housing replacement kit can be utilized to restore units
having blower assemblies that require repair. This kit contains the
following items: Blower housing assembly with cut--off plate and a
loose parts bag with screws. See Table 1 for kit usage. See Table 2
for kit contents.
A replacement motor and blower wheel are NOT included in this
kit and must be ordered separately.
Table 1
Kit Usage
INPUT
BTUH
KIT NUMBER
WHEEL SIZE
40,000
338106---757---CBP
11 x 7
60,000
338106---754---CBP
11 x 8
80,000
100,000
338106---755---CBP
11 x 10
120,000
338106---756---CBP
11 x 11
