113
30AW
N°
Exchange
parts
name
Work procedure (IMPORTANT: Ensure gloves are
worn at all times to avoid risk of injury)
Remarks
(7)
Reactors
(012)
1. Perform the works from 1 to 4 of (1) and (2).
2. Remove the inverter assembly item (4).
3. Remove the reactors’ connectors.
5BLFPòUIFTDSFXT 451tQDTöYJOH
the reactor to the partition plate.
5. Pull the reactor upward and detach it from the
partition plate.
6. Replace the fail reactor with a new one.
(8)
Control
P.C. Board
(015)
1. Perform the works from 1 to 4 of (1) and (2).
WARNING
Never disassemble the inverter for 1 minute after po-
XFSTVQQMZIBTCFFOUVSOFEPòCFDBVTFBOFMFDUSJD
shock may be caused.
2. Remove the connectors connected to the control
P.C. board. (Indoor power supply, Temperature
sensor, PMV coil, 4-way valve coil, Compressor case
thermo, Fan motor)
t6OMPDLUIFMPDLPGUIFIPVTJOHQBSUBOEUIFO
remove the connectors.
3. Remove the lead wires connected to the control P.C
board.
Compressor lead U: CN200 Red
V: CN201 White
W: CN202 Black
Reactor cord CN05 White CN06 White
4. Remove the earth wire from the control P.C. board.
(Trust B tight screw Ø4 × 6, 1 pc.)
5. Remove the fixing screws of the control P.C. board.
(Screw with collar for fixing element Ø3 × 16, 9 pcs.
Pan S tight screw for fixing board Ø3 × 20, 1 pc.)
6. Remove the control P.C. board. (Supporter: 5
positions)
NOTE :
Be careful to take out because there is sealing
material for the heat sink.
7. Replace the control P.C. board with a new one.
NOTE :
t#FTVSFOPUUPDPOGVTFGPS$PNQSFTTPSMFBE7
(CN201 White), Reactor lead CN05 and CN06.
t#FTVSFOPUUPDPNFPòPGUIFJOTVMBUJOHTIFFU
Attention:
The inverter board is fixed at the side ca-
binet by a steel braket. When replace the P.C. Board
remember to detach it from the defective board and
to screw it at the new one.
Control P.C. board
Upper fan motor
Compressor lead
Ear th wire
wer
an motor
emperature
sensor
Compressor lead
Earth wire
Lower
fan motor
Temperature
sensor
4-way valve coil
4-way valve coil
PMV coil
Indoor power supply
P.C. board
fixing screw
Insulating sheet
Control P.C. board
Sealing material
Element fixing screws
(9 positions)
Compressor
case thermo.
Reactor lead
Maintenance
8
Screws
Reactors
Partition plate
Steel braket
SM_30AW.indd 113
14-03-2011 14:46:49
Summary of Contents for 30AWH004HB
