Adit 3500 - Release 1.6
23
Quick Start Guide
Web-Based Management
Web-Based Management
The web-based management interface allows you to control various system parameters. The interface
is accessed through a web browser.
To access the management console:
NOTE:
The following assumes that you have connected the PC to the LAN port of the Adit
3500.
1. Launch a web browser on your PC in the LAN to which the Adit 3500’s LAN port is connected.
Note: If connection to the 3500 is to be through an Ethernet or T1 WAN, the remote admin
WAN access must be enabled with the following command sequence:
2. Type the Adit 3500’s IP address or name in the address bar.
Example: http://192.168.1.1.
z
Default IP address is
http://192.168.1.1
Note: to display the current IP address of the systems, use the following CLI command:
#show interface ethernet 1
(LAN)
#show interface ethernet 2
(Eth WAN)
3. Login to the unit.
Enter User Name and Password. Note: these setting should be changed from the default settings
after the initial login.
z
Default user name is
admin
z
Default password is
admin 123
NOTE:
After a few minutes of inactivity, the session will automatically timeout and the
operator will be required to log in to continue the session.
WARNING!
I
F
YOUR
U
SER
N
AME
AND
P
ASSWORD
ARE
SET
TO
THE
DEFAULT
SETTING
,
IT
IS
RECOMMENDED
THAT
YOU
MODIFY
THEM
FOR
SECURITY
PURPOSES
.
Command
Description
Username: admin
Password: ********
Log into the system (username and password).
Adit 3500> enable
Enter the Privileged mode.
Password: ********
Enter password for the Privileged mode.
#configure terminal
Enter the Configuration mode.
(config)# remote-admin web
primary-port enable
Enable remote web admin.
