www.carrera-products.com
Issue 12/2011 • PO903035
Page 2
3. operation
Danger!
Make sure to always have the handle folded out before
switching on the device.
note:
Before using for the first time, switch the device on
for a few minutes and allow it to run at the highest setting.
As a result of the manufacturing process, a slight odour may be
produced. This is not harmful and only occurs during initial use.
Ensure that the room has good ventilation.
Switching on/off and controlling air flow
1. Insert the mains plug into an easily accessible socket.
2. The on/off switch and switch for the power settings allows you
to switch the device on and select the desired power setting:
0
= off
1
= slow air flow, lower temperature
2
= fast air flow, higher temperature
3. After drying, set the on/off switch to
0
(off) and pull out the
mains plug.
Styling nozzle
The styling nozzle makes it possible to target the air flow at spe-
cific sections of hair.
• Attach the styling nozzle to the front of the hair dryer so that it
clicks into place.
• The styling nozzle can be rotated into any desired position.
• You can remove the cooled styling nozzle from the hair dryer,
e.g. for cleaning.
4. Cleaning
Danger!
Before cleaning, pull out the mains plug and allow the
device to cool down.
WarnIng!
Do not use any harsh or abrasive cleaning agents.
Clean the device regularly. Be particularly sure to check that the
air inlet and air outlet are free from dust, hairs and fluff.
• Wipe down the casing, the rear safety mesh over the air inlet
and the styling nozzle with a slightly damp cloth.
Clean front safety mesh
• Remove the styling nozzle from the hair
dryer. Hold the hair dryer with the air outlet
facing downwards. Clean the front safety
mesh with a brush.
Clean rear safety mesh
1. Rotate the rear safety mesh anti-clockwise
until you can remove it.
2. Hold the hair dryer with the air inlet facing
downwards. Clean the inside and outside
safety mesh with a brush.
3. At the inner edge of the removed safety mesh, you will see
two small round knobs. Place the safety mesh with these two
knobs into the recesses at the sides of the hair dryer. Rotate
the safety mesh clockwise until it is firmly in place.
5. Storage
Danger!
Do not wrap the cable around the device (cable break
danger!).
• You can use the hanging loop in order to store the device in a
safe and practical manner.
• For space-saving storage of the device you
can fold in the handle.
6. troubleshooting
Danger!
• Do not attempt to repair the device yourself.
• Always remove the mains plug from the socket when-
ever a fault occurs.
Fault:
Please check the following:
No function
• Is the power supply secured?
• Has the overheating protection switched off
the device? Set the on/off switch to
0
(off),
pull out the plug from the mains socket, and
allow the device to cool adequately. Before
switching it back on, ensure that there are no
hairs or foreign bodies blocking the air inlet.
7. technical data
article no.
9221312
Mains voltage
220-240 V ~ 50/60 Hz
Protection class
II
Output
1600-1800 W
Ambient temperature
-10 °C to +40 °C
In the interest of product improvements, we reserve the right to
make technical and optical changes to the device and accesso-
ries.
8. Conformity
The CE mark was applied in accordance with the
corresponding European directives.
The conformity declaration is held by the distributor:
LUTTER & PARTNER GmbH • Schleissheimer Str. 93a •
85748 Garching bei München • GERMANY
9. Disposal
This symbol indicates that the product must be disposed
of in a separate waste collection within the European
Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may
not be discarded with normal domestic waste, but must
be taken to a collection point for recycling electrical and
electronic devices.
Packaging
If you want to dispose of the packaging, make sure you
comply with the environmental regulations applicable in
your country.
10. guarantee
Under our terms of warranty, we guarantee that our technical ap-
pliances will provide faultless quality and function.
the guarantee
period is 36 months from the date of purchase.
Please keep
your receipt as proof of purchase. The trader‘s legal guarantee
obligation is not limited by this guarantee.
InForMatIon on tHe guarantee:
Please note that incorrect or improper handling of the device,
failure to comply with the safety precautions that apply to the
device, use of force or alterations or repairs that are carried out
by a party other than the service address that we have author-
ized void the guarantee.
Furthermore, components that are subject to normal wear
and tear or use are excluded from the guarantee.
During the guarantee period, you can send defective appliances
to the Service Center (see address below),
postage paid
. Then
you will receive a new appliance or get the repaired one back free
of charge.
Parcels not prepaid cannot be accepted.
Please use the original packaging in order to avoid any damages
in transit and enclose a copy of the receipt. A detailed description
of the complaint will help reduce repair time.
After expiry of the guarantee period,
you can still send a defec-
tive appliance to the address below, also
postage paid
. Then,
however, repairs made will be
at your expense.
Lutter & Partner gmbH
- Servicecenter
Schleissheimer Strasse 93a
85748 Garching bei München • Germany
Tel.: +49-(0)1805 660 007 (0.14 euro/minute from the German
landline phone network, max. 0.42 euro/minute from German
mobile phone networks; international calls are subject to the rates
of the respective phone service providers)
Fax: +49-(0)89-54 80 195-810 • E-Mail: [email protected]
