Wirelessly stream music from your iPhone, iPad, or other Blue-
tooth-enabled device to your BMW car stereo. The CoolStream
CarPro plugs into the 30 Pin iPod cable and integrates Bluetooth
audio streaming into your car’s stereo system. The CarPro is
designed and serviced by CoolStream in New Hampshire.
Product Overview
This Box Contains
• CoolStream CarPro Bluetooth Receiver for BMW iPod Cable
• Quick start guide
How to Install in Car
1. Locate 30 Pin iPod cable that
comes with original or aftermarket
iPod integration.
2. Plug the 30 Pin iPod cable into
the connector of the CoolStream
CarPro until it is locked in.
3. As soon as the head unit is
switched on the CoolStream
CarPro will power on. The LED
will flash blue to indicate that it
is in pairing mode.
How to Pair for the First Time
1. Go to “Settings” on your iPhone/iPod/iPad or other mobile
device.
2. Select Bluetooth. Confirm the Bluetooth function is on and
search/scan for available devices.
3. Tap CarPro to pair. Enter four zeros,
“0000”
, as the PIN. Tap
Pair to complete the connection.
4. The LED should be a steady blue light once the CoolStream
CarPro is paired to the mobile device.
5. Play music. Confirm that the volume on your mobile device is
at
MAXIMUM
.
How to Re-Connect
1. The CoolStream CarPro can be left on the 30 Pin iPod Cable
all the time.
2. Once you turn off the car, the CoolStream CarPro will turn off
and the Bluetooth connection with your mobile device will be
broken.
3. After turning on the car again, the CoolStream CarPro will
automatically power on and re-connect to the last mobile
device paired to it. The LED will be a steady blue light once
that CoolStream CarPro is re-connected.
4. If the CoolStream CarPro does NOT connect to your mobile
device, go to Settings -> Bluetooth and tap
CarPro
to pair.
How to Pair a Different Mobile Device
1. In order to pair a different mobile device to the CoolStream
CarPro, the Bluetooth function of the first phone paired to the
CarPro must be turned off.
2. The LED will be a blinking blue light.
3. Now a different mobile device can pair to the CoolStream
CarPro using the instructions above.
Safety Notice. PLEASE READ BEFORE USE.
We strongly advise that full attention is to be paid to the traffic
conditions whenever the vehicle is moving. Distracted drivers can
lead to road accidents both large and small.
Disclaimer
CoolStream cannot guarantee that Android 4.1 operating system
or earlier will be supported by the car’s media display and remote
controls when using the CoolStream CarPro.
Please consult our website, www.coolstreamrocks.com, for in-
formation about firmware updates related to new versions of IOS.
CoolStream will do everything possible to maintain compatibility
with IOS versions higher than IOS 8.3.
Trademarks
Other product names mentioned in this Quick Start Guide,
packaging, website or other CoolStream materials are used for
identification purposes only. These product names may be the
trademarks and/or registered trademarks of their respective
companies.
1
2
3
LED Indicator
30 Pin Connector
