5
If machine is pulling load and stops, due to heavier adhesives on carpet, IMMEDIATELY stop machine and allow for
tension in the line and cut carpet into smaller strips. Some adhesives are stronger than others. Do not overwork the
motor by trying to take up carpet with strips wider than machine will pull. Cut into manageable strips according to
strength of adhesive on carpet.
NEVER
use machine without restrictor plate in place.
NEVER
ride on any part of the machine or plates.
NEVER
pull a load diagonally.
ALWAYS
wear eye protection and safety equipment when operating.
ALWAYS
inspect for damaged cable, tighten nuts and bolts after each use.
ALWAYS
pull loads from straight ahead.
Continually check for level winding on spool during operation.
Replace damaged cables immediately.
There are three holes in the base that can be used if extra gripping power is desired. Mount a piece of tack
strip with pins pointing in the appropriate direction and machine will have more gripping power.
