manualshive.com logo in svg

CarpeStar CUMG Series, User Manual, Page: 16 / 38

Share
Download
CarpeStar CUMG Series User Manual Download Page 16

IP Address 

The three parameters from left to right are IP address, subnet mask and default 

gateway of LAN 1 or LAN 2. 

DNS Server 

DNS server address of LAN 1 or LAN 2. 

Receive Packets, 

Transmit Packets 

The amount of receive/transmit packets after the gateway’s startup, including three 

categories: All, Error and Drop. 

Current Speed 

The current speed of data receiving and transmitting. 

Work Mode 

The work mode of the network, including six options: 10 Mbps Half Duplex, 10 Mbps 

Full Duplex, 100 Mbps Half Duplex, 100 Mbps Full Duplex, 1000 Mbps Full Duplex 

and Disconnected. 

Note: The mode of 1000 Mbps Full Duplex is unavailable for the Uniway2100 

gateway. 

Runtime 

Time of the gateway keeping running normally after startup. This parameter 

updates every 2s. 

CPU Temperature 

Display the real time temperature of the CPU. 

Serial Number 

Unique serial number of an 

C

UMG gateway. 

WEB 

Current version of the WEB interface. 

Gateway 

Current version of the gateway service. 

Uboot 

Current version of Uboot. 

Kernel 

Current version of the system kernel on the gateway. 

Firmware 

Current version of the firmware on the gateway. 

3.3 Gateway Setting 

SIP Settings includes 

Subboard Gateway

 and 

Subboard Configuration

. See Figure 3-5. 

Figure 3-5 Gateway Settings 

3.3.1 Subboard Gateway 

The  subboard  gateway  interface  displays  all  the  subboard  types  of  the 

C

UMG  gateway.  See 

Figure 3-6. Click 

Configuration

 to go to the configuration interface of each subboard. You can 

refer to the corresponding gateway’s manual for detailed operations. 

C

UMG Gateway User Manual (Version 1.6.3) 

Page 11 

Summary of Contents for CUMG Series







































Reviews:

No comments