- 9 -
3.1 Connection
FABRIZIOLO is easy to use product. Simply connect your source (CD player,
MP3 player, etc..) and amplifier / headphone following below steps, you can
enjoy the high quality music in a second:
-
Connect “Line Out” mini socket (5) to the “Line In” of your amplifier using
the supplied mini jack to RCA audio cable.
-
Connect your CD player to the “Line In” RCA socket (6) using normal RCA
audio cable (not included)
-
You can also connect your MP3 player to the 3.5mm AUX input socket (3)
using the included mini jack cable. Once this input is used, it will over-ride
the rear RCA input (6).
-
You can connect your headphone to the headphone socket (9). Once this
output is used, it will over-ride the rear “Line Out” socket (5)
-
Connect the power adaptor to the “Power In” connector (8).
It’s now all set and you are ready to enjoy your music.
3.2 Operation
Please follow the below steps such that you can enjoy the product without any
difficulty:
-
Turn the “Volume controller” (1) clockwise to turn on the pre-amplifier and
keep the level at minimum.
Now the vacuum tube (11) will slowly turn
on and you will see blue light from the top window. Wait for around 15
seconds to let the vacuum tube warm up to its operation temperature.
-
Play your source equipment and you can hear music from your speakers.
Now, you can control the volume level by turning the “Volume controller” (1)
-
There is a “3.5mm Headphone socket” (2) in the front panel. You can
connect your headphone to the unit. Once your headphone is connected,
the rear output will be disconnected automatically.
-
To turn off the amplifier
, turn the “Volume controller” (1) to minimum level.
Then, switch off your power amplifier. Now, turn the “Volume controller” (1)
to fully turn off the pre-amplifier.
