background image

 

3.1 Connection 

 

Carot-One FABRIZIOLO 30k is easy to use product.  Simply follow below 

steps, you can enjoy the high quality music in a second: 

-

  Connect your CD player or other audio source to the “Line in” RCA socket 

(6) using normal RCA audio cable (not included). 

-

  You can also connect your Smartphone to the 3.5mm AUX input socket (3) 

using a mini jack cable (included).    Once this input is used, it will over-ride 

the rear RCA input (6) 

-

  You can connect your headphone to the headphone socket (2).    Once this 

output is used, it will over-ride the rear “Line Out” RCA socket (5) 

-

  If you are using external amplifier, connect a RCA cable from the rear “Line 

Out” RCA socket (5) to your amplifier 

-

  Connect the power adaptor to the “Power In” connector (4). 

It’s now all set and you are ready to enjoy your music. 

 

3.2 Operation 

 

Please follow the below steps such that you can enjoy the product without any 

difficulty: 

 

To Turn on the unit 

-

  Turn the Volume controller (1) clockwise to turn on the amplifier but keep at 

minimum level.  Wait around 15 seconds to allow the vacuum tube to 

warm up to its operation temperature. 

-

  Turn on your external amplifier. 

-

  Play your source equipment and you can hear music from your headphone 

or your loudspeakers connected to the external amplifier.    Now, your can 

control the volume using volume control (1) 

 

To Turn off the unit 

-

  Turn the Volume controller (1) counter-clockwise to minimum level 

-

  Turn off your external amplifier 

-

  Now, turn the volume control (1) fully counter-clockwise to turn off the 

FABRIZIOLO 30K. 

 

 

 

 

- 9 -

 

Summary of Contents for ERNESTOLO 50K
















Reviews: