Carot One DIEGOLO Class-T Manual Download Page 4

 

-­  6  -­  

15.  Damage  requiring  service  

The  equipment  should  be  serviced  by  qualified  service  personnel  when:  
A.      the  power-­supply  cord  or  the  plug  has  been  damaged,  or  
B.   objects  have  fallen,  or  liquid  has  spilled  into  the  equipment,  or  
C.      the  equipment  has  been  exposed  to  rain,  or  
D.      the  equipment  does  not  appear  to  operate  normally  or  exhibits  a  marked  

change  in  performance,  or  

E.   the  equipment  has  been  dropped  or  the  enclosure  damaged.  
  

Safety  compliance  

  
This  equipment  has  been  designed  to  meet  the  EOCENE  60065  international  
electrical  safety  standards.  
This  device  complies  with  Part  15  of  the  FCC  Rules.  
Operation  is  subject  to  the  following  two  conditions:  
(1)  This  device  may  not  cause  harmful  interference,  and  
(2)  This  device  must  accept  any  interference  received,  including  interference  
that  may  cause  undesired  operation.  
  

WARNING:

 

  

Due  to  the  mains  switch  being  located  on  the  rear  panel,  the  apparatus  must  
be  located  in  an  open  area  without  anything  obstructing  access  to  the  mains  
switch.  
Mains  plug/appliance  coupler  is  used  to  disconnect  device  and  it  shall  remain  
readily  operable.  
  

Correct  disposal  of  this  product

  

This   marking   indicates   that   this   product   should   not   be   disposed   with   other  
household  waste  throughout  the  EU.  
To   prevent   possible   harm   to   the   environment   or   human   health   from  
uncontrolled  waste  disposal  and  to  conserve  material  resources,  this  product  
should  be  recycled  responsibly.  
To  dispose  of  your  product,  please  use  your  local  return  and  collection  systems  
or  contact  the  retailer  where  the  product  was  purchased.  

 

Summary of Contents for DIEGOLO Class-T










Reviews: