INST-PM-6045
Rev B 04/04/2018
Note: Photos may have a different appearance depending on chamber options.
1.
Turn off chamber and unplug power cord.
2.
Remove shelves from chamber.
3.
Remove shelf channels located near top of chamber if necessary.
4.
Remove false floor from chamber by pulling access port upwards while bending
edges downward as shown below.
5.
Remove (4) screws securing intake diffuser using Phillips screwdriver bit as shown
below.
Note: Retain screws.
6.
Remove intake diffuser by pulling towards front of chamber.
REPLACING ATOMIZERS
Disconnect electrical power before removing interior parts.
Intake Diffuser Mounting Screws (as viewed from inside chamber under intake diffuser)
Intake Diffuser
False Floor Access Port
Summary of Contents for 6045
Page 1: ...MODEL 6045 INST PM 6045 ...
