Shape bricks to
clear bath profile
Tiles
Ø12 copper
run off tube
50x25
Timber
batten
Grade subfloor
min. 1:60
Unfinished floor
Standard 40mm
waste outlet
Suitable moisture barrier
ISLAND INSTALLATION
Compressed cement
fibre sheet backing
Tiling
Stud
75 min.
IMPORTANT:
Refer to Local Authority for
minimum setout from wall
*
Sealant
BUILT-IN INSTALLATION
50
19
50x25
batten
Compressed cement
fibre sheet backing
Tiling
Stud
Sealant
10
TIMBER SUPPORT ALTERNATIVE
50x38
framing
Tiles
Wall board
Bond inner face of bath to timber frame
as detailed with approved floor and wall
panelling adhesive
Water Stop
On the indicator lines, position and fix timber supports to base of the bath and floor
with an approved floor and wall panelling adhesive or equivalent adhesive to provide
a neat fit support. Ensure the rim of the bath is levelled during this procedure.
437
40
230
Timber support battens
1525 / 1675
760
IMPORTANT:
Local Authorities have varying
installation requirements, check with Authority
or your Caroma representative for further details.
88
950 / 1100
400
Caroma Industries Limited ABN 35 000 189 499
Sales Offices in all States.
The Vivas bath, a simple design with a contemporary twist; a gently reclining end so you can
relax in style. Complete with four tile flange for built-in installation.
1525mm long x 760mm wide x 437mm deep – standard Code No.VI5W
1675mm long x 760mm wide x 437mm deep – standard Code No.VI7W
Durability:
Sanitaryware grade acrylic resists chipping, will not rust and has excellent
heat retention properties. Its high gloss finish has natural slip resistance.
Minor scratch marks can be removed with gentle metal polishes, such as
Brasso.
Waste Outlet:
The reinforced waste outlet is suitable for 40mm diameter standard waste
assembly.
Bath Capacity:
Vivas 1525 - 255 litres; Vivas 1675 - 270 litres
Installation:
The bath is suitable to be installed for both built in and island installations.
The bath is supported around its rim and the base is supported with timber
base supports.
Refer to Sheet 9.01.1 for further installation information.
Colours:
White only.
Dimensions:
All dimensions are in millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design
and performance of its products. The right is therefore reserved to vary
specifications without notice.
Vivas
Acrylic Bath
Nominal Sizes:
1525mm x 760mm x 437mm
1675mm x 760mm x 437mm
