3
www.CarnivalKingSupplies.com
.
||||| [email protected]
TUB-STYLE
SNO CONE MACHINE
Manual
Installation and Operation Instructions
Operation
1. Remove plastic tub and wipe with a dry cloth, check that the blade is firmly installed.
2. Open the handle assembly/ice pusher and fill the horn with the desired amount of either cube or chunk ice,
do not overfill.
3. Close the handle assembly/ice pusher and please ensure that the machine is on a level stable surface, the
feet are intact and level.
4. Press the switch to start the unit, depress the handle to push the ice cubes through the blade.
Ice Shaver Machine Specs
Item #
382SCM350TUB
Overall Dimensions
21.65” W x 16” D x 16.25” H
Tub Size
20" x 15” x 5.5”
Tub Capacity
50 lbs.
Frame Material
Stainless Steel
Horsepower
1/3 HP
Capacity
500 lbs. Per Hour
5. Crushed ice will be directed into the plastic tub.
a. The plastic tub is freezer safe and can be used to store crushed ice.
6. Once the desired amount of ice is crushed, press the switch to turn off the motor and cutting head.
7. Scoop the crushed ice into a serving container or cup and pour or pump Sno- cone syrup onto the finished cone.
Two ounces of syrup is recommended for a 6 oz. serving of ice.
8. Repeat steps 3-6 for multiple batches
9. This unit is equipped with a manual reset button to prevent injury. If the unit becomes jammed and shuts down
you will need to Unplug the machine from the power source, remove the ice that has cause the jam, plug the
machine back into the power source and press and release the reset button
RPM
1700 RPM
Wattage
350W
Voltage
120V
Amps
2.8 Amps
Hertz
60Hz
Phase
1
Plug
NEMA 5-15P
Function and Purpose
This unit is intended to be used for shaving and crushing ice in commercial foodservice operations only. It is not intended
for household, industrial, or laboratory use.
Before using this equipment, it must be cleaned and
dried thoroughly
. Clean all surfaces before use. Failure to clean
surfaces before using the unit could cause food contamination.
This ice crusher is intended for crushing ice cubes for use in sno-cones, ice cubes should be a maximum of 2 inches in
diameter. Larger pieces should be broken up before processing through the machine. Your sno-cone machine can produce
up to 500 lbs. of ice per hour, or about 1000 6 oz. sno-cones per hour.
