![background image](http://html1.mh-extra.com/html/carmen/mc2500/mc2500_manual_2559347007.webp)
ENGLISH • 7
> CLEANING AND MAINTRANCE
• Wipe the trimmer surface with a wet soft cloth.
• Never immerse the unit and power adapter into water or
other liquids.
• Rub the attachments periodically with medical alcohol to
disinfect them.
• Cleaning the blades with the attached brush.
• When the blades are very dirty please remove the whole
cutting attachment and clean it under running water.
After drying it thoroughly, put the attachment with the
blades back on the trimmer reversely.
• Put the trimmer with the accessories back to the original
package at a dry and dust free place, out of reach of
children and incapacitated people.
Beard trimmer
Use the beard trimmer without a comb to trim hair close to
the skin or to create clean lines around your beard, neck and
sideburns. To trim hair close to the skin, place the flat side
of the cutting element against your skin and make strokes
against the direction of hair growth. For contouring, hold
the cutting element perpendicular to the skin and move it
upwards or downwards with gentle pressure.
Trimming Nose/Ear hair
• Make sure nasal passages are clean.
• Place nose/ear trimmer on the trimmer.
• Switch the trimmer on and insert the tip of the
attachment into one nostril.
• Slowly move the tip in and out while turning it around
at the same time in order to remove unwanted hair. For
best results, make sure the side of the tip is firm against
skin. This will reduce the tickling effect that can occur
during trimming of nose hair.
• Turn off the trimmer. Wipe attachment clean after each
use.