12
CUSTOMER SUPPORT TEAM:
+44 (0) 333 220 6060
5. Clean the hair chamber with the cleaning
brush, or rinse under warm running tap
water, to remove any residual debris
(Fig.16).
6. Do not use a towel or cloth to dry the
shaving foil or cutters, as this may cause
damage; allow to air dry thoroughly.
7. Reattach the shaving head by snapping it
back onto the groomer (Fig.17)
8. Rinse the groomer’s body and back
shaving attachment under running warm
tap water. Wipe dry with a soft clean towel
or cloth.
Replacing the shaving head:
• If the shaving foil and cutters are worn
or damaged, do not continue using the
groomer. Replace the shaving foil and
cutters immediately.
• It is recommended that your replace your
shaving foil and cutter once a year.
• The foil is a precision part. Handle with
care.
1. Always switch the groomer OFF and
remove the groomer from the charging
stand before replacing shaving head.
2. Remove the shaving head by pulling it off
the appliance (Fig.18).
3. Place the new shaving head on the
groomer by snapping it into place (Fig.19).
You will hear a “click”.
After replacing the shaving head, check that the
shaving head is firmly attached before using the
groomer.
16
17
18
19
