Carmelli NG2729 Assembly Instructions Manual Download Page 2

THANK YOU!

2

CARE AND USE

1. This product is intended for 

INDOOR

 use only. 

ASSEMBLY TIPS

1. Find a clean, level surface to begin the assembly of your mirror. We recommend that two adults 

work together to assemble this item. 

You may want to carefully cut or tear the four corners of the box 

so that the bottom of the box can be used as your work surface.
2. 

Remove all of the contents from box and verify that you have all of the parts shown on the Parts 

List before you begin assembly. 

Note: Some parts may be pre-installed or pre-assembled.

3. Some figures or drawings may not look exactly like product.
4.

 When installing parts that have more than one screw or bolt, hand tighten all screws or bolts

in place before final tightening with screwdriver or wrench.

5. Electric screwdrivers may be helpful during assembly; however, please set a 

low torque 

and use 

extreme caution because screws may be stripped or overtightened, resulting in damaged parts, if the 

electric screwdriver’s torque is set too high. 

 

 

 

 

WARNINGS!

READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.

CHOKE HAZARD - THIS ITEM MAY CONTAIN SMALL BALLS AND PARTS

 

NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.

IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS

IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT. 

 

Thank you for purchasing this product. 

We work around the clock and around the globe to ensure 

that our products maintain the highest possible quality. However, in the rare case of issues during 

assembly or use of this product, please contact our Consumer Hotline for immediate assistance 

before contacting your retailer. Please read the warranty information at the back of these assembly 

instructions for further details. 

Summary of Contents for NG2729











Reviews: