Owner’s Manual | Model
R820
Carmanah Technologies Inc. Copyright © 2006
Document number: MAN_ROAD R820 Owner's Manual 36983_vB
Last revised: November 7, 2006
12
3.4
Preparing R820 Components for Field Installation
Now that the Solar Engine is configured, it must be prepared for installation:
1. Carefully re-install the logic card
housing cover located between the two
batteries. Ensure that the foam rubber
gasket on the underside of the cover is
positioned over the wires exiting the
logic card.
2. Connect the solar panel wires located
on the underside of the solar panel
cover to the female connector with one
red and two black wires going into the
logic card housing.
3. Re-install the cover with the solar panels
on the top of the Solar Engine. Ensure
the notch in the top cover mates with the
antenna mount.
4. Disconnect the button and the signal
heads and carefully recoil the wires
exiting the mounting tee located on the
bottom of the Solar Engine.
5. The R820 Solar Engine is now ready for
installation on the pole.
Figure 15: Solar
Engine Assembly
Figure 17: Solar
Engine Assembly
with wires connected
Figure 16: Solar Engine top cover
showing notch for antenna
assembly
Figure 14: Logic Card Housing Cover
Summary of Contents for R820
Page 2: ......
