2
Standard Features
See Fig. 1 for a description of the model number.
DISCHARGE CHECK VALVE
The discharge check valve is an axial movement type located
within the compressor. The check valve is field serviceable by re-
moving the oil separator or discharge line to access the valve in
the compressor discharge housing.
COMPRESSOR MOTOR
The 06Z compressor has one standard motor offering
;
a 2-pole in-
duction motor for improved compressor efficiency.
INTEGRATED DISCHARGE MUFFLER
The 06Z compressor is equipped with an integrated discharge
muffler specifically designed to reduce discharge gas pulsation
and resonance, resulting in reduced refrigerant line vibration and a
quieter refrigeration system.
PRESSURE RELIEF VALVE
The 06Z screw compressors have an internal relief device, which
is designed to relieve pressure from the high side to the low side
of the compressor.
SUCTION AND ECONOMIZER SCREENS
To increase the reliability of the compressor, a screen has been
incorporated as a standard feature into the suction inlet and econ-
omizer inlet of the compressor. The suction inlet screen is in-
stalled into the suction inlet of each compressor. The economizer
inlet screen is supplied in the economizer flange package (which
is included in the compressor component kit. Please refer to the
economizer flange installation instruction document for more
details.
CAPACITY CONTROL
All 06Z screw compressors are VFD capable as defined in Table 1
and do not utilize a slide valve unloading system. The compressor
capacity may be varied continuously to a lower limit of 22% of the
economized compressor’s full load capacity for air-cooled
applications.
VI CONTROL
All 06Z models are supplied with a Vi control valve which func-
tions to maintain optimum compressor efficiency. The Vi control
valve setting is variable and is actuated by the Carlyle PCM mod-
ule, which continuously monitors the operating pressures and con-
trols the Vi output accordingly. Depending on the operating condi-
tion and drive frequency, the compressor will run more efficiently
with either the Vi control valve engaged or disengaged.
Fig. 1 — Model Number Nomenclature
Table 1 — Variable Speed Screw Compressor
Offering
MODEL NUMBER
NOMINAL
HP
VOLTS/
HERTZ
SPEED
RANGE
MOTOR
TYPE
06ZCE1H3AA06013
130
460V - 100 Hz
25 - 105
Hz
2-pole
Induction
06ZCE1T3AA06013
380V - 100 Hz
06ZCE1Y6AA06013
200V - 100 Hz
06ZFC2H3AA06013
215
460V - 98 Hz
25 - 98 Hz
06ZFC2T3AA06013
380V - 98 Hz
06ZFC2Y6AA06013
200V - 98 Hz
06ZJG3H3AA06013
325
460V - 95 Hz
25 - 95 Hz
06ZJG3T3AA06013
380V - 95 Hz
06Z F C 2 H 3 A A 0 6 0 1 3
Compressor Family
06Z
– VFD Screw Compressor
Frame Size Group
C
– Frame 1 - 139 MM
F
– Frame 2 - 168 MM
J
– Frame 3 - 199 MM
Outlet Case Group
C
– 2.7 Axial Vi
E
– 2.85 Axial Vi
G
– 3.0 Axial Vi
Motor Group – HP and Type
1
– 130 HP Induction Motor
2
– 215 HP Induction Motor
3
– 325 HP Induction Motor
Motor Group – Voltage
H
– 460 VAC
T
– 380 VAC
Y
– 200 VAC
Rotor Case Group
3
– 3 Terminal Pins
6
– 6 Terminal Pins
Nameplate Group
A
– Internal Use
Discharge Group
A
– Integral Muffler
B
– Standard Discharge
Accessory Group
0
– No Accessories
Paint Group
6
– Grey
Future Group
0
– Not Used
Mounting Feet Group
1
– Bar Feet - 500 MM
Packing Group
0
– No Packaging
1
– Returnable
3
– Wood
4
– Multi-pack
5
– Service/Air Freight
Summary of Contents for 06ZCE1H3AA06013
