Carlton PF16SS, Instruction Book

Page: 4 / 8

Align the BASE with the neck of
the fan and use the BASE SET
SCREW to join the two together.
How to assemble your fan
Make sure
your
fan is
unplugged
before you
attempt to
assemble
Thread the BLADE onto the MOTOR
SHAFT. Ensure the slot in the BLADE
matches up with the notch on the
MOTOR SHAFT
.
Remove the four REAR GUARD
LOCK SCREWS on the MOTOR. Align
the rear guard with the four holes on
the MOTOR (ensuring the handle is
positioned at the top of the fan). Insert
the four screws and tighten.
Oscillating pin
1
3 2
ON/OFF and
speed control
Motor
Power Cord
Adjusting Knob
Rear Guard
Rear Guard lock screw
Blade
Blade set screw
Nut
Front Guard
Screw
Height Adjusting
Knob
Base
Base set screw