background image

When using your juicer, especially with children
present, basic safety precautions should always be
followed including the following:

Before you switch on

Read all instructions carefully before using your juicer.

Check that the voltage range given on the juicer
rating label corresponds with that of your mains
supply.

Keep children away from your juicer when it is in
use.

This juicer is suitable for normal household use
only and not for commercial use.

Use your juicer on a level work surface only.

Do not operate your juicer with a damaged cord
or plug or after it has malfunctioned or has been
dropped or damaged. Return your juicer for
examination, adjustments, or repair.

During operation

Do not hold your juicer at an angle while it is
working.

Use only the pusher to push food into the filling shaft.

Never put your fingers in the filling shaft.

Never open the cover before the motor has
stopped. Never immerse the motor base in water;
wipe with a camp cloth to clean it.

General safety

Unplug your juicer when not in use and whenever
it is cleaned or moved.

To disconnect your juicer, switch off, grip plug and
pull from wall outlet. Never yank the cord.

Repairs on electrical juicers must only be done by
authorized service personnel. Faulty, unqualified
repair work may cause accidents or injury to the
user.

If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a
hazard.

If the power cable is damaged it must be repaired
by a qualified repairer.

Important

Your juicer can only be switched on when
both the cover and the securing clips have
been fully locked into position.

2

Safety

Safety

Carlton J2000 IB.qxd  24/05/2004  09:21  Page 2

Summary of Contents for J2000









Reviews: