The wires in your coffee maker mains lead are coloured in accordance
with the following:-
The wire which is coloured Blue must be connected to the terminal in
the plug which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal in
the plug which is marked with the letter L or coloured Red.
The wire which is coloured Green and Yellow must be connected to the
terminal in the plug which is marked with the letter E or by the Earth
symbol or coloured Green or Green and Yellow.
You must use a 13 amp plug
(BS 1363)
, and fit a 13 amp fuse
(BS 1362)
. If any
other type of plug is used a 13 amp fuse must be fitted, either in the
plug, adaptor or at the distribution board.
Wiring Instructions
Brown
(Live)
Blue
(Neutral)
13 amp fuse
Cord grip
N
L
E
Green &
Yellow
(Earth)
Warning! this appliance must be Earthed
Descaling
your coffee maker
If you live in a hard water area, descale the coffee maker
occasionally with a cleaning agent.The frequency required
depends on the hardness of your water and how often the
coffee maker is used. An indication of 'furring up' is when
the coffee takes much longer to brew.
Switch the coffee maker on, then allow the cleaning agent
to flow through into the carafe (without filter fitted).
Empty the used solution and rinse the carafe well. Let the
maximum amount of clean water flow through several
times to avoid affecting the taste and aroma of your coffee.
WARNING
Use the descaler according to the
manufacturers instructions.These cleaning
agents are generally caustic.
Carlton CM2000v2.qxd 15/02/00 16:45 Page 7
