7
GB
Steam Ironing
Steam ironing should be carried out at the highest settings on
the
Temperature Dial
. Steam ironing at lower temperatures
may cause water to leak from the soleplate.
The quantity of steam is regulated by the
Steam Control
. Move
the steam selector to a suitable position depending on the
quantity of steam required and the ironing temperature.
Shot of Steam Button
This feature may be used during steam or dry
ironing but only when the iron is at its highest
setting.
Press the
Shot of Steam
button to release a
powerful surge of steam. You may need to press the
button a few times to prime the surge of steam.
Wait a few seconds for the steam to penetrate the
fabric before pressing the button again.
Excessive use of this feature will cause the
iron to cool, and the
Temperature Indicator
will illuminate. If this happens, wait for the
Temperature Indicator
to go off before using the
feature again.
Vertical Steam
Hold the iron upright and press the
Shot
of Steam
button for vertical ironing. If the
Temperature indicator
illuminates, stop
pressing the
Shot of Steam
button and wait
until it goes off.
The iron gives off steam continuously only if you hold the iron horizontally. You can stop the
continuous steam by placing the iron in a vertical position or by moving the steam selector to
0
.
0
INCREASE
(Max)
OFF
(Dry Ironing)
