Taking out of service and disposal
www.carlstahl.com
- 18 -
9.
Taking out of service and disposal
9.1
Taking out of service
1.
Take the sheet metal lifting clamp out of service by marking it.
2.
Contact the manufacturer/service (see Chapter 1.1).
3.
Dispose of the sheet metal lifting clamp if necessary.
9.2
Disposal
Disposal of sheet metal lifting clamp
NOTICE ABOUT DISPOSAL
If the sheet metal lifting clamp can no longer be repaired or if it is no longer functional, it
must be disposed of in accordance with the applicable legal provisions.
Disposal of packaging material
NOTICE ABOUT DISPOSAL
According to the Packaging Ordinance, the dealer must take back for re-use and/or ensure
disposal of the packaging for its products that do not bear the symbol of a system for
complete disposal.
