P a g e |
67
11.3.6 Laser pulse rate
The
Laser pulse rate
slider determines the speed at which the laser is firing as the head turns. Usually this setting
is left at the minimum value of 5,000 Hz (5,000 measurements per second). However, for larger scan areas, this
value may be increased to ensure sufficient point density at longer distances. The maximum setting is 15,000 Hz.
Together with the
Head rotation
rate, the
Laser pulse rate
determines the density of points along each radial scan
line.
11.4 Reporting
The
Reporting
section provides tools to configure the way scan results are displayed in the
Scan list
, the
Scan
graph
and in scan reports. It also enables you to setup email addresses to which reports are dispatched.
Figure 66 Laser rate
Figure 67 Settings > Reporting > Reporting Triggers
Summary of Contents for FiX1
Page 2: ......