Carlos mendoza Showco Wash 575, Owner'S Manual

Page: 8 / 21

Control board Function :
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect
the controller with the fixture or one fixture with another.
DMX-OUTPUT
DMX-input
1 - Ground
2 - Signal (-)
3 - Signal (+)
1
- Ground
2 - Signal (-)
3 - Signal (+)
Occupation of the XLR-connection:
XLR mounting-socket:
XLR mounting-plug:
Caution:
At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a
120 resistor between Signal (-) and Signal (+) into a 3-pin XLR-plug and plug it in the
DMX-output of the last fixture.
The transform of the controller line of 3 pins and 5 pins (plug and socket)
6.Control board Operation
Pan movement in positive or negative direction
Function
Condition
Mode
YES--negative direction
Tilt movement in positive or negative direction
Address code set
Reset YESreset
YES--linear
Color wheel change color linear or stepping
YES--negative direction
Working mode
DMX512 mode
Automatic
Lamp on/off
7
www.carlosmendoza.com.mx