Carlos mendoza Showco PARLED 100, User Manual, Page: 8 / 11

8
Part 2 Master/Slave & Using DMX Controller
Channel Function & Effect DMX Value
CH1 Dimmer 0~255% 0-255
CH2 RED 0~255% 0-255
CH3 GREEN 0~255% 0-255
CH4 BLUE 0~255% 0-255
CH5 COLOR MACRO (7 preset color effect) 0-255
CH6
AUTO PROGRAMS (7 preset programs & 7 edit
programs
）
0-255
CH7 Strobe 0-255
CH8
Program change time
Program run time 0-127
128-255
CH9 IP ADDRESS 0-255
2.1 Software Profile
The system will loading the manufacturer ’s setting and show the
information by the Digital Tube when it is opened by the first time . For
checking the Digital tube function , you could also set up as below :
SET
→
LOAD
→ ON .
Each time when you open the model , the system will show
the manufacturer and the Software format（
ATRT VER1.0
，
or you
could press ESC pass by these information
）
,then load the User ’s
setting.
ADJ
→ CAL is White Balance’ s calibrate Menu ,it is for
calibration the RGB Color (Using Software to calibrate the the
www.carlosmendoza.com.mx