CHANGING SYSTEM CODE
(optional)
The user can change the system code signal if interference occurs with opera-
tion. If you use other wireless products in your home, there is a slight possibility
of interference. Use the following instructions to change the current system code
setting to a new setting.
Important:
If you change the system code on the motion sensor, you must also
change the code on the plug-in receiver and remote control. If the system code
does not match on all items, the system will not function properly!
1. Unplug Receiver.
2. Locate jumper shunts (black rectangular pieces) on back of Receiver.
3. Use tweezers to place jumpers on the appropriate prongs to match desired
code.
4. Plug Receiver into outlet.
5. Remove the wireless motion sensor bottom cover.
6. Set the two jumper shunts in the same jumper configuration as in the
Receiver.
7. Re-install the motion sensor bottom cover.
8. Remove remote control's back cover.
9. Set the two jumper shunts in the same jumper configuration as in the Receiver
and motion sensor.
10. Replace back cover.
0501 IS167
Made in China
©2005
25701 Science Park Drive
Cleveland, Ohio 44122
www.lamson-sessions.com
TROUBLESHOOTING TIPS:
PROBLEM:
Light does not come on when there is motion in front of motion sensor
or when turned on by the remote control.
SUGGESTION:
Check that the receiver is mounted within 100’ of the motion sen-
sor or 50’ of the remote control. Check that the system code is the same in the
motion sensor and in the light control. Check that metal objects do not block the
motion sensor signal.
PROBLEM:
Light goes on and off randomly.
SUGGESTION:
Change the system code in the motion sensor, plug-in receiver,
and remote control.
SPECIFICATIONS
Motion Sensor
Motion detection range: Up to 60’ x 140˚
Batteries: 4 AA alkaline
Plug-In Receiver
Maximum Load: 600 watts incandescent
Voltage: 120V AC, 60Hz
Motion sensor also works with HS3620, HS3655, HW2150D, HW2165D, HW2170D,
HW2190, and RC7000D.
LIMITED WARRANTY
The product you have purchased is guaranteed against defects in workman-
ship and materials for the period stated on the package. Warranties implied
by law are subject to the same time period limitation. Some states do not allow
limitations on how long an implied warranty lasts, so this time limitation may
not apply to you.
If the product fails due to a manufacturing defect during normal use, return the
product and dated sales receipt to the store where purchased for replacement
OR send the product and the dated sales receipt to:
Lamson & Sessions
25701 Science Park Drive
Cleveland, OH 44122 USA
Attn: LHP Customer Service
Not Covered
- Batteries, light bulbs, and other expendable items are not covered
by this warranty. Repair service, adjustment and calibration due to misuse,
abuse or negligence are not covered by this warranty. Unauthorized service or
modification of the product or of any furnished components will void this warranty
in its entirety. This warranty does not include reimbursement for inconvenience,
installation, set-up time, loss of use, postage, unauthorized service, or other
products used in conjunction with, but are not supplied by, Lamson & Sessions.
All requests for replacement must include a
dated sales receipt
(copies accepted).
LAMSON & SESSIONS IS NOT LIABLE FOR LOST PROFITS, INDIRECT, SPECIAL,
EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING WITHOUT
LIMITATION ANY SUCH DAMAGES DUE TO IMPROPER WIRING OR MISUSE OF THE
PRODUCT. As some states do not allow the exclusion or limitation of incidental
or consequential damages, the above limitation and exclusion may not apply
to you.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
This device complies with RSS-210 of Industry Canada.
ALSO AVAILABLE FROM CARLON:
• Extend-A-Chime
®
– lets you hear your existing wired doorbell in remote areas
of your home or yard
• Plug-in and Battery Doorbells and Chimes
• On/Off Remote Switches
• Touch and Automatic Lighting Controls
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
If you have questions or need further
assistance, please call Lamson & Sessions at: 1-800-346-2646 Mon. - Fri.,
9 a.m.-4 p.m. EST
