0310
SOCKET RE-CONFIGURATION
If the clip-on candle plug
does not fit into light string
socket, follow the steps
below. Make sure tree
lights are unplugged from
electrical outlet.
1. Select a bulb on the
existing Christmas tree light
string for installation of the
clip-on candle.
2. Remove the plug base from the existing light string bulb. Do this by
straightening the two contacts and pulling off the plug base. Remove
the plug base from the clip-on candle using the same instructions
for the bulb.
3. Thread contacts from clip-on candle through holes in base from bulb.
4. After contacts have been individually placed in separate holes, bend
each contact back. The plug is now ready for installation.
CAUTION
To reduce the risk of overheating, replace burned out ornament or bulbs
promptly.
LIMITED WARRANTY
The product you have purchased is guaranteed against defects in
workmanship and materials for the period stated on the package.
Warranties implied by law are subject to the same time period limitation.
Some states do not allow limitations on how long an implied warranty
lasts, so this time limitation may not apply to you.
If the product fails due to a manufacturing defect during normal use,
return the product and dated sales receipt to the store where purchased
for replacement OR send the product and the dated sales receipt to:
Lamson & Sessions
25701 Science Park Drive
Cleveland, OH 44122 USA
Attn: LHP Customer Service
Not Covered
- Batteries, light bulbs, and other expendable items are
not covered by this warranty. Repair service, adjustment and
calibration due to misuse, abuse or negligence are not covered by this
warranty. Unauthorized service or modification of the product or of any
furnished components will void this warranty in its entirety. This warranty
does not include reimbursement for inconvenience, installation, set-up
time, loss of use, postage, unauthorized service, or other products used
in conjunction with, but are not supplied by, Lamson & Sessions.
All requests for replacement must include a dated sales receipt (copies
accepted). LAMSON & SESSIONS IS NOT LIABLE FOR LOST PROFITS,
INDIRECT, SPECIAL, EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL
DAMAGES INCLUDING WITHOUT LIMITATION ANY SUCH DAMAGES DUE
TO IMPROPER WIRING OR MISUSE OF THE PRODUCT. As some states do
not allow the exclusion or limitation of incidental or consequential
damages, the above limitation and exclusion may not apply to you.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This device complies with RSS-210 of Industry Canada.
ALSO AVAILABLE FROM CARLON:
• Extend-A-Chime
®
– lets you hear your existing wired doorbell in
remote areas of your home or yard
• Plug-in and Battery Doorbells and Chimes
• On/Off Remote Switches
• Touch and Automatic Lighting Controls.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
25701 Science Park Drive
Cleveland, Ohio 44122
www.lamson-home.com
Made in China
IS157
Removed
plug base
Contacts
