These devices have an integrated, automatically resetting protection temperature restrictor which switches off
when the devices become too hot. Once the housing has cooled sufficiently, switching back on is automatic.
Nevertheless, ensure that "carlo" infrared pew radiators are not covered and heat dissipation is unhindered (to
prevent heat accumulation). Do not poke anything into the devices as this poses a risk of accidents and damage
to the devices.
Note: When paints, solvents, adhesives and the like are used in a heated room, producing vapour which can
ignite due to the temperature of the heating element (approx. 190°C), such as when the wooden pedestal is
sealed, it is important to ensure that the "carlo" infrared pew radiators are switched off and cooled to room
temperature.
"carlo" infrared pew radiators are "dark radiators". A special non-breakable, coated heating element with high
radiation capacity generates mild, long-wave infrared radiation heat.
"carlo" infrared pew radiators reach their nominal heat output after a heat-up phase of about 15 minutes.
Switching on the heaters 15 minutes before services start is therefore recommended. "carlo" infrared pew
radiators can be operated with time controllers, room thermostats, power regulator devices, etc. This ensures
that the heating system is always switched off after services (preventing unwanted usage and so keeping energy
bills down). Changing the power output to the ideal level is also possible during services. Defective devices and
connector cables must be replaced. Plugs pulled out must be reinserted. Any dust deposits must be removed.
The work must be carried out by specialist personnel. The installer of the system is instructed to explain correct
usage and maintenance to the operator.
6. LABELLING AND CE CONFORMITY
ÖVE quality mark
CE mark to Directive 2006/95/EG
This certificate forms the basis for the EC declaration of conformity and CE marking by the manufacturer or
its representative, and certifies conformity with the aforementioned standards as laid down in Low Voltage
Directive 2006/95/EC.
These installation and operating instructions must be kept in a safe place, and be passed on with the "carlo"
infrared pew radiators in the event of a change of owner or user.
7. TECHNICAL DETAILS
Nominal voltage: 230 V~ Protection class: I Dimensions: 185 x 60 mm (WxH) + 28 mm installation
bracket
Order Nr.
Mains Device length/ Power rating
connection
mm
EBST00500 links
500
200 W
EBST00600
links
600
240 W
EBST00700
links
700
280 W
EBST00800
links
800
320 W
EBST00900
links
900
360 W
EBST01000
links
1000
400 W
EBST01100
links
1100
440 W
EBST01200
links
1200
480 W
EBST01300
links
1300
520 W
EBST01400
links
1400
560 W
EBST01500
links
1500
600 W
Order Nr.
Mains Device length/ Power rating
connection
mm
EBST0050R rechts
500
200 W
EBST0060R
rechts
600
240 W
EBST0070R
rechts
700
280 W
EBST0080R
rechts
800
320 W
EBST0090R
rechts
900
360 W
EBST0100R
rechts
1000
400 W
EBST0110R
rechts
1100
440 W
EBST0120R
rechts
1200
480 W
EBST0130R
rechts
1300
520 W
EBST0140R
rechts
1400
560 W
EBST0150R
rechts
1500
600 W
Subject to technical changes without prior notice. Typesetting and printing errors excepted.
Kirchenbankstrahler Montage 01/15 - 4/4
certificate Nr.: 55-034-08
