▲
▲
8
12
Index
Energy meter pages
3
10
■
How the F key changes function depending on
the display page
❑
Pages from "00" to "13" (04 in single phase mode)
Displaying of the variables
key enabled if the alarm latch function is activated,
access to the reset of the latch alarms.
To reset the latch alarm press the
key; after that a
message will appear "WILL YOU RESET THE LATCH
ALARMS?": if you choose
you will enable the reset
procedure, if you choose
there won’t be any reset. The
reset of the latch alarm is only available if the alarm event
is finished.
❑
Pages from "14" to "18" (from 05 to 09 in single phase
mode). Displaying of the MIN and MAX values
The
key is active, that means that you have access to the
reset function of the “MIN” and “MAX” values. To reset the
"MIN/MAX" recording, proceed as follows: enter the
function by pressing the
key, after that a message will
appear: "WILL YOU RESET MIN/MAX VALUES, WILL
YOU CONTINUE?" If you choose
there won’t be any
reset, if you choose
the reset will not be made. The
(moves from left to right) and
(moves from right to left)
keys allow you to select the value that you want to reset;
to confirm the reset press the
key. To exit the function
press the
key again.
7
■
How to scroll the various pages
To scroll the various pages, use the
and
keys.
Pressing the
key in any one of the display pages,
you access to the programming phase. The
key,
on the contrary, has various functions depending on
the selected page.
Displaying of the variables
