VMU-C
VMU-C Instruction manual
23
3.1.5
FTP SERVICE CONFIGURATION
By clicking on “FTP SERVICE” the following 3 sub-menu are presented:
3.1.5.1
AVAILABLE COMMUNICATION PROTOCOLS
Two different protocols are available in the FTP section:
a) FTP
– Push: it works by uploading files to a remote server upon a preconfigured
schedule
b) HTTP
– Pull: by means of an HTTP API (application program interface) it is
possible for a remote client to poll data from the VMU-C on request
Both the protocols can be used together paying care not to exceed with HTTP-Pull
requests (by sending too many requests at the same time it is possible to exceed the
capacity of VMU-C thus causing overload).
In any case, neither FTP-Push nor HTTP-pull can be used together with the DP protocol
(they match 2 different scenarios)
3.1.5.2
FTP SERVICE SETTINGS
By clicking on “SETTING” it is possible to configure the parameters needed to enable
data communication from VMU-
C to the customer’s FTP server:
FTP Service
The relevant fields must be completed according to the following guideline:
Summary of Contents for VMU-C EM
