UDM 35/40 PANEL METER USER MANUAL
17
Programming example:
Retransmit a 4-20mA signal proportional to the following displayed values:
Lo.D = 0 and Hi.D = 18.
When
is displayed, the Analog Output program may be addressed. Press
to enter sequence.
is displayed. Press
to toggle to the first
position. Use the
keys to select value “0”. Press
to toggle to the left to
“tens” position. Using
keys, select value “2” and press
enter to confirm
all choices and advance to the next program sequence.
will be displayed. Press
to toggle to “hundreds” position and use
keys to select “1”. Press
to toggle to each remaining position and
select “0” for each. When completed, press
to confirm and advance to the
next program sequence.
will be displayed. Using the
keys choose either “A” for 20mA
output full range, or “U” for 10v output. In this example, the selection would be
“A”. Press
to confirm. Press
to advance to the next program step
sequence.
Serial Port Output
When
is displayed you may elect to configure a serial port address and
baud rate. Press
.
will be displayed. Using the
key, toggle to the
desire position and select the proper value(s) using the
keys. Press
to
confirm.
When
is displayed, use the
keys to select the desired baud rate
indicated in kbits/sec. Press
to confirm. Press
to advance to the next, and
last, program step sequence.
