Videobox
– User manual
17
Commissioning guidelines
It is assumed that the necessary infrastructures (poles, road cupboards
, …) have previously
been installed. As above described in this manual, the IP cameras have to be mounted on the
poles, at a minimum height of 8 meters (recommended height 10 meters).
a
Provide power for each IP camera (PoE or wiring).
b
Connect each camera to the LAN network:
▪
If the SBPVBE videobox and the IP cameras can be installed on the
same lamppost, they can be connected to the same Ethernet switch.
▪
Should they be installed at different locations, it is suggested to use W-
LAN adapters to connect them together.
c
For each IP camera, a static IP address has to be set according to the LAN
network where the SBPVBE videobox is connected.
The following information must be entered in the appropriate fields in the IP
camera’s setting page.
IP camera’s parameters list
IP Camera name
IPv4 address
Port
Login credentials (username and password)
Manufacturer
Model
Video compression
Complete URL of the video stream
N.B: to configure the static IP address of each camera, refer to the manual that
comes with the device.
d
Provide the list of IP cameras and their parameters to Carlo Gavazzi
