How to install a Sx2WEB system
33
1.6 Ethernet connection
The Sx2WEB24 is configured by using the Sx tool, which has to be connected via the LAN port on the
top of the Sx2WEB24.
When connecting the network cable, the Ethernet port LEDS will also light up.
To configure the IP address, please refer to the Sx tool software manual.
The LAN connection can be used to connect the Sx2WEB24 to an Ethernet network when it has to be
connected to other devices over TCP/IP such as the BTM-Tx-24 display.
The TCP/IP device can be connected
directly to the Sx2WEB24 with a peer to
peer connection by using fixed IP (see the
Sx tool manual to configure a fixed IP).
The TCP/IP devices can be connected
to the Sx2WEB24 via a router by using
both DHCP addressing or fixed IP with
NAT forwarding if the Sx2WEB24 is to
be visualised via the Internet.
