CARLO GAVAZZI RSBS Series, Manual, Page: 2 / 17

2
Carlo Gavazzi Ltd.
RSBS
RSBS DS ENG 27/05/20
Enter the code entering the corresponding option instead of .
Order code
RSBS 23 32 A2 V23 HP
Code Option Description Notes
R -
Soft starter
S -
B - Compressor soft starter
S - Single phase control
23 - 230 VAC Rated operational voltage
32 - 32 Arms Rated operational current
A2 - 230 VAC Rated control voltage
V - Options
2 -
Auxiliary relay output Alarm status indication
3 - Third generation
C24 Internal start capacitor: 200 – 240 μF
C17 Internal start capacitor: 145 – 175 μF
C10 Internal start capacitor: 100 – 140 μF
C00 External start capacitor
HP - Control algorithm for high pressure starts See caution notes
Selection guide
Start capacitor size Part number
200 – 240 μF
RSBS2332A2V23C24HP
100 – 140 μF RSBS2332A2V23C10HP
145 – 175 μF RSBS2332A2V23C17HP
External RSBS2332A2V23C00HP
For proper model selection refer to our online soft starter selector tool:
http://www.gavazziautomation.com/nsc/HQ/EN/soft_starters
• The internal relays may be in an undefined state due to shocks during transportation. In case both relays are latched in
the ON state, there will be a direct on line start of the compressor, even without a control signal.
• To avoid direct on line start, the user should do an initial power up with no load connected for a period of ≥ 3 seconds.
• Short circuit and overload protection are not provided with the RSBS and must be installed separately.
• The RSBS soft starter is not to be used as a safety device. The RSBS, on its own, cannot guarantee any safety and
therefore other components need to be used to ensure that the system operates safely.
• Repeated starts under unbalanced pressure (resulting in HP starts) will reduce the lifetime of the RSBS.