Internet
Connection
Internet
Connection
Internet
Data Collection via Internet
Data Collection via GSM
Control
Commands
Events /
Logged data
SMS
Alarms
Events /
Logged data
Control
Commands
Data base
User Access
Dupline
®
Fieldbus
Dupline
®
Fieldbus
Energy
Meter
Counter
Module
Smoke
Detector
Temperature
Sensor
Water
Leakage
Detector
Controller
Controller
Digital
I/O
Analog
I/O
Counter
Module
Internet
Connection
Central Server
Du line
®
Fieldbus
Installationbus
4
Specifications are subject to change without notice (24.05.04)
Dupline
®
is a registered trademark. A product of the CARLO GAVAZZI Group
G 3800 0036, G 3800 1036
Dupline-Online Principal Diagram
and 16. See manual for memo-
ry map information.
Software
The Dupline Data Access soft-
ware package (type no. DUP-
DATACC) has been developed
specifically for the Master
Generator and the Data Logger.
It contains two software tools
that provide easy access from a
PC to Dupline digital, analog
and counter data via one of the
RS232 or RS485 ports. The
DDE-driver provides a Dynamic
Data Exchange interface, which
can be used from applications
that support client side DDE
such as Microsoft EXCEL.
Getting Dupline data into an
EXCEL spreadsheet is a simple
copy-and-paste operation. The
Dupline ActiveX driver provides
an ActiveX interface, which is a
Microsoft standard for commu-
nication between two products.
The Dupline ActiveX driver can
be used from any development
tool that supports client side
ActiveX such as Microsoft Visu-
al Basic, Delphi and Borland
C++ builder. The Dupline Data
Access package can be used
on single Data Loggers as well
as Data Logger networks.
Radio Modem driver
The Data Logger has a built-in
driver for control of an external
Radio Modem, which can be
used to create wireless links
where no cable is available in
parts of an installation. One
Data Logger just be defined as
the central Data Loggers and
up to 32 Data Loggers can be
defined as remote Data Log-
gers. The central Data Logger
is continuously polling and
updating the Dupline data from
all remote Data Loggers via the
radio modem network, and in
this way it makes the entire
system operate as one big
Dupline network. Apart from
increased reaction time
(depending on the number of
remote Data Loggers), the
system will operate as if it was
one Data Logger connected to
all the I/O-modules with cable.
The Data Logger supports
the Radio Modem type 2ASxE
and all 3AS types from
the Finnish manufacturer SATEL
(www.satel.fi). Find below an
application diagram for the
Radio Modem option.
Note:
Analink modules cannot
be used with Radio Modems.
On-board I/O
The Data Logger has 4 digital
inputs and 4 digital outputs on-
board. These have been imple-
mented to reduce the cost of
remote stations with only a few
signals (e.g. in connection with
an SMS alarm system or radio
modem remote stations). The
onboard I/O’s are used via the
logic functions of the Data Log-
ger, where they can be
assigned to specific channel
addresses.
