Contents
PLEASE read this first.......................................................... 2
Codes and standards........................................................... 2
G3B Gas burner at-a-glance .............................................. 3
Prepare site • prepare burner • mount burner ................ 4
Install gas piping .................................................................. 9
Wire burner ......................................................................... 10
Check system • start-up burner/appliance .................... 12
Perform checkout procedure • fill out certificate ........ 14
Maintenance and service procedures ........................... 17
Troubleshooting .................................................................. 19
Dimensions and mounting information .......................... 21
Replacement parts............................................................. 22
Instruction Manual
Ratings
Input
:
.................................................... 60,000 to 180,000
btuh
Fuels
:
.........................................Natural gas or propane gas
Max. supply pressure .............................14
inches
w
.
c
.
Min. supply pressure ................................5
inches
w
.
c
.
Manifold pressure .................................3.5
inches
w
.
c
.
Electrical
: Power ...................................120
v
/60
hz
/1-
phase
, 8
amps
Motor..................................................1/50
hp
, 3450
rpm
Ignition
:
.................................. Norton hot surface ignitor, 120
v
Control
:
.................................Honeywell S89C primary control
Agencies
: ........................................................CSA certified, U. S.
The G3B burner has been assigned
U. S. Patent No. 4397631
Installer/servicer
— Except where specifi-
cally stated otherwise, this manual must be used only by
a
qualified service technician
. In the state of MA, this
product must be installed by a licensed plumber or gas
fitter. Failure to comply with this or other requirements
in this manual could result in severe personal injury, death
or substantial property damage.
Handling
— Handle burner (and hot surface ignitor)
carefully to avoid cracking or breaking the ceramic ignitor.
Ignitor protrudes slightly beyond burner head. Do not set
burner on its end.
User
— Refer only to User’s Information manual
for information regarding operation of this burner. The
remainder of this manual is intended only for your
service technician. The burner and heat exchanger must
be inspected and started at least annually by your service
technician.
126 Bailey Road
North Haven, CT 06473
Ph 203-680-9401
Fx 203-680-9403
Carlin Combustion Technology, Inc.
T
ech
support
800-989-2275
carlincombustion.com
©
Copyright 2015 — Carlin Combustion Technology, Inc.