Carl Valentin Vita II series, Quick Reference Manual

Page: 87 / 172

Vita II
English 87
Print settings
Keys: ,
Speed
Indication of print speed in mm/s.
Value range: 50 mm/s to 200 mm/s (see the technical data).
Contrast Indication of value to set the print intensity when using different materials, print speeds or
printing contents.
Value range: 10% to 200 %.
Key:
Transfer ribbon control Off: The ribbon control is deselected, i.e. the printer continues without an error message.
On: The ribbon control is selected, i.e. the current print order is interrupted and an Error
Message appears at the printer display.
strong sensibility: The printer reacts immediately to the end of the transfer ribbon.
weak sensibility: The printer reacts at approx. 1/3 more slowly to the end of the transfer
ribbon.
Key:
Y displacement Indication of initial point displacement in mm.
Value range:
−30.0 to +90.0.
Key:
X displacement Displacement of the complete print transverse to the paper direction.
Value range:
−90.0 to +90.0.
Key:
Tear off Indication of value to which the last label of a print order is moved forward and is moved back to
the beginning of label at a new print start.
Value range: 0 bis 50.0 mm
Standard: 12 mm.
Label layout
Keys: , ,
Label length Indication of label length in mm.
Minimum height: 5 mm (dispenser mode: 25 mm).
Gap length Indication of distance between two labels in mm.
Minimum value: 1 mm.
Key:
Column printing Indication of width of one label as well as how many labels are placed side by side.
Key:
Measure label
Press key to start measuring.
Key:
Label type
Generally adhesive labels are set. Press key to select continuous labels.
Key:
Material selection Selection of the used label and transfer ribbon material.
Key:
Photocell Selection of the used photocell.
The selection of one of the following photocell types is possible: transmission photocell normal
and inverse, reflexion photocell normal and inverse, ultrasonic photocell (option).
Scan position (AP)
Entry of percental label length by that the label end is searched.
Key:
Label error length In case an error occurs, indication after how many mm a message appears in the display.
Value range 1 to 999 mm
Synchronisation On: If a label is missed on the liner an error message is displayed.
Off: Missing labels are ignored, i.e. it is printed into the gap.