13
UM Serie 50VioLab EN rev.1 19.05.2020
EN
Operation of the device
After the switching on, the instrument enters measure mode in the last parameter used.
To scroll through the different parameter screens, press the key
; the current measurement
parameter is shown in the display on the top left (e.g.:
).
Sequence of parameters in measure mode:
pH 50 VioLab
COND 50 VioLab
PC 50 VioLab
pH
Conductivity
pH
mV
TDS
mV
ORP
ORP
Conductivity
TDS
Note: Pressing the button
after the last parameter, the instrument automatically restarts from the
first one.
In the measurement screens for the pH, ORP and Conductivity parameters, press the key
to start the
calibration of the active parameter. (next paragraphs).
On the left side of the display, through a string of different colours, it is always indicated how the
instrument is located.
Note: in order to confirm to the user the switching from one mode to another, the string flashes.
String
Meaning
The instrument is in measure mode.
The instrument is in calibration mode (automatic or manual in
relation to the user's choice).
The user is in the setup mode.
The configuration menus can concern the characteristics of the
parameters or the general setting of the instrument.
Summary of Contents for COND 50 VioLab
Page 1: ......
