9
8
note for 2100:
Because of this very complicated
mechanism, the watch will handle all of the date
switches without a problem until the year 2100.
this is because February 2100 has only 28 days,
rather than the 29 that would be usual in a leap
year. on 1 March 2100, a simple manual date
correction has to be done as a result.
Set the moon phase / leap year and month
continue to press corrector
D
repeatedly until the
current month is shown.
5
1
Press corrector
A
repeatedly
until the "full moon" position
is shown in the moon phase.
2
Press corrector
A
for the
number of days since the
last full moon.
4
Press corrector
D
repeatedly
until the current year is
shown (IIII = leap year, I = 1
year after leap year, etc.).
the full moon is completely
visible. use a calendar to
determine the date of the
last full moon.
Warning:
the correctors must not be used
between 8:00 p.m. and 2:00 a.m. because doing
so can damage the movement.
set the current date by
pushing corrector
c
.
1
Intentionally set the
current time at a.m. or p.m.
by rotating the crown.
2
Pull the crown until it is in
position
1
. the second hand
does not move.
1
set the date: Press corrector
c
repeatedly until the date
indicator shows 1.
3
set the current day of the
week by pushing corrector
B
.
2
In order for the date to properly move at midnight,
the hour hand must intentionally be set to a.m. or
p.m. based on the current time.
Set date / day of the week
Set time
Push the crown back to the
initial position. the second
hand is back in motion.
3
En
En
