manualshive.com logo in svg

Carinae Sports Speed Sensor, User Manual

Share
Download
Carinae Sports Speed Sensor User Manual Download Page 20

Firmware   Update   

Firmware   Update   is   used   to   update   the   Speed   Sensor   with   new   firmware.   
Procedure   

1. Turn   on   Speed   Sensor   

2. Navigate   to   the   Speed   Sensor   app   Firmware   Update   Screen   
3. Press   Connect   button   on   Firmware   Update   Screen   

4. A   dialog   will   appear   that   says   “Wait   for   SpeedSensorBoot”   message   
5. The   SpeedSensorBoot   message   will   appear   in   the   top   notification   view   
6. When   SpeedSensorBoot   appears,   press   Dismiss   on   the   dialog.   

7. Press   Select   file   &   Update   button      
8. Select   Internal   Image,   then   select   .bin   file   
9. Firmware   will   take   just   over   3   minutes   to   download.      

10. When   download   is   complete,      turn   on   theSpeed   Sensor   and      

re-­‐connect   on   the   view   screen   that   appears   

11. Note   the   firmware   Rev   number   has   changed   

Top   notification   view   

Connect   button   

&   
Select   file   &   Update   Button   

Dialog   views   

Summary of Contents for Speed Sensor























Reviews:

No comments

Brands by name

Popular brands

Load more brands