66
7
Vedpak 141GB_Version 2_22.10.09
160793
GB
C. Attaching onto the original rear view mirror in the
vehicle (as illustrated below). Put the side of the
electronic rear view mirror with connected trap to one
end of the original rear view mirror inside the
vehicle. Connect upper and lower straps on the other
side of the electronic rear view mirror in the method
described in step B, so that the electronic rear view
mirror is mounted on the original rear view mirror.
Adjust straps so that the two mirrors are completely
pressed against each other and neither can move
without the other.
D. Remove the protective film from the mirror; wipe the
surface with damp and soft non-erosive fabric.
E. Fix main cables behind the support of the original rear
view mirror, then guide them along the upper side
of the front windshield and finally conceal them under the
panel of the vehicle.
AttENtIoN:
Stick the two adhesive foams backings on the back of
monitor. The two foams are for fixing the mirror monitor
firmly onto the existing one while fastening the straps. The
arrows indicate the two proper areas for sticking the two
foams. The two foams needed to stick simultaneously so as
to prevent the housing bent.
